Pump Removal/Installation; Drier Removal/Disassembly - Honda GoldWing GL1100 Service Manual

Remolle the air hose from the pump
off the pump
top compartment cover and
Disconnect the air hose at the drier and remove the pump
assembly.
Disconnect the pump wire connector.
11 N'm (8 ft-lb)
DRIER
PUMP~
it to the
it to the
sp~lcified
and install it onto the
InstalIation
clean ATF to the new
hose connector.
Connect the hose to the drier and
torque.
Install the pump in the reverse order of removal.
Install the pump filter hose.
Connect the air hose to the motor and
specllfied torque.
Remove the drier.
CAUTION: Do not turn the air hose more than one turn.
the top compartment cover and remove the motor.
ren,oving the
Disconnect the air hose from the gauge
bolt
Removal! Disassembly
Loosen the air hose at the drier side, then disconnect the
hose the drier while the hose to prevent
it from
LUII""'y.
12..43