Status Menu; Generate Report File - Lightware UMX-OPT-TX150R User Manual

9.6. Status menu

Basic device information, such as the installed boards' firmware and hardware revisions
are displayed in this window.

9.6.1. Generate report file

Lightware Matrix Controller allows user to generate a standard report file which contains
basic information about the health and the version numbers of the device.
The default file name is:
Lightware_matrix_standard_report_dd_mm_yyyy@hh_mm.lwr
User's issues can be solved easier by Lightware technical support if the generated report
file was sent.
During the process a big red message will be appeared:
Important! Let the Lightware Matrix Controller software to finish the process! Do not exit or select
another menu item.
Section 9. Software control – Using the Lightware Matrix Controller
Figure 9-9. Status menu
UMX-OPT-TX150R
User's Manual
Page 67 / 107