Security Settings; System Administrator Passcode - Fuji Xerox DocuCentre S2420 User Manual

9 Tools

Security Settings

System Administrator Passcode

Used to set the passcode for entering System Administration mode.
You can enter between 4 to 6 numbers from 0 to 9.
[11111] (five "1" digits) is set at the time of factory shipment.
Follow the steps below to make the settings.
1
In the [Tools] screen, select [Security Settings],
and then press the <OK> button.
For information on how to display the [Tools] screen, refer to
"System Settings Procedure" (P.162).
2
Select [System Admin. Passcode], and then press
the <OK> button.
3
Enter the desired passcode in the New Passcode
field.
Note
4
Press the <OK> button.
9
204
• The entered passcode is displayed as asterisks
(*).
Tools
Fax Settings...
System Settings...

Security Settings...

Security Settings
System Admin. Passcode...
System Admin. Passcode
New Passcode
[* * * * * ]