Supported Environment; Print Feature; Scan Feature - Fuji Xerox DocuCentre S2420 User Manual

2 Environment Settings

Supported Environment

This section describes the environment settings needed to use the machine's print, scan and
fax features.

Print Feature

The machine can be connected directly to a computer for use as a local printer, or can be
connected to a network for use as a network printer.
2
Use as a Local Printer
Connect the machine to a computer with a USB cable.
Use as a Network Printer
Print from network-connected computers using the TCP/IP protocol.
To use the machine as a network printer, you need to activate the port to use for printing.
LPD: Activate this setting when using the LPD port.
Port9100: Activate this setting when using the Port9100 port.
Note
For information on how to set TCP/IP, refer to "Setting the Network Environment" (P.36).
For information on how to activate a communication port, refer to "Activating the Communication Port To Use" (P.40).

Scan Feature

The machine supports the following Scan functions:
Using the USB connection
Scan with PC application
Uses the USB connection to import scan data in a computer with a TWAIN or Windows
Imaging Acquisition(WIA) compatible application.
To use this function, you must install the scan driver from the Driver CD Kit CD-ROM.
Note
For information on how to use this feature, refer to "Using an Application to Load Scan Data from the Machine via USB"
(P.146).
32
Local Connection
USB
Network Connection
LPD / Port9100
• This feature is available when the Network Kit is installed.
• To install the scan driver, follow the instructions provided in the manual (HTML file) included on the
CD-ROM.