Fuji Xerox DocuCentre S2420 User Manual page 72

3 Product Overview
No. Component
10 <Machine Status> button
11 <Energy Saver> button
12 <Stop> button
13 <ClearAll> button
14 <Start> button
15 <Error> indicator
16 <Data> indicator
3
17 <Speed Dial> button
18 <C> (Clear) button
19 <Address Book> button
20 <Back> button
21
<Collated/Resolution>
button
(Quick-Button)
22 <2 Sided> button
(Quick-Button)
23 <Original Type> button
(Quick-Button)
24 <Lighten/Darken> button
(Quick-Button)
25 <Scan> button
26 <Fax> button
72
Press this button to print reports and check the machine information such as
the status of consumables and the machine's IP address.
Lights up when the machine enters Energy Saver mode to conserve power
when the machine is left idle for a while. You can also press this button to
enter or exit Energy Saver mode.
Press this button to cancel a current job or failed job.
Press this button to reset the displayed settings of each feature to default
values or clear the entered numbers. The setting is returned to the same
condition as the machine is powered on.
Press this button to start scanning document or confirm the value of each
setting.
Blinks if a system error occurs.
This indicator lights up when a problem other than a system error occurs
with the machine, including paper jams and running out of paper.
Blinks when the machine is sending or receiving data to or from a client. This
indicator lights up when data is stored in the machine's memory or when
the machine receives faxes waiting to be printed.
Press this button to specify a recipient with entering a Speed Dial number
when sending a fax.
Press this button to delete one numerical value that you have entered.
Press this button to display the recipients registered for the Address Book
when sending data by fax, e-mail, or network.
Press this button to return the display to the previous screen.
Press this button to display the setting screen for the Collated or Resolution
function that lets you change the output method for Copy feature and the
resolution for Scan feature.
The button lights up when this function is available.
For more information on the Quick-Button, refer to "About Quick-Buttons" (P.73).
Press this button to display the setting screen for the 2 Sided function that
lets you select 2 sided printing for Copy and Scan features.
The button lights up when this function is available.
For more information on the Quick-Button, refer to "About Quick-Buttons" (P.73).
Press this button to display the setting screen for the Original Type function
that lets you change the type of document for Copy, ID Card Copy, and
Scan features.
The button lights up when this function is available.
For more information on the Quick-Button, refer to "About Quick-Buttons" (P.73).
Press this button to display the setting screen for the Lighten/Darken
function that lets you adjust the brightness for Copy, ID Card Copy, and
Scan features. Also, the Toner Saver setting is available for Copy feature.
The button lights up when this function is available.
For more information on the Quick-Button, refer to "About Quick-Buttons" (P.73).
Press this button to use the Scan feature. When the Scan feature is selected,
this button lights up.
For more information, refer to "Scan" (P.141).
Press this button to use the Fax feature. When the Fax feature is selected,
this button lights up.
For more information, refer to "Fax" (P.115).
Function