Fuji Xerox DocuCentre S2420 User Manual page 166

9 Tools
System Settings
9
166
Setting Item
Border Limit
Receive Size
Print Size (Received Letter)
Immediate Fax Switch
Off Hook Level
Region
Activity Report
Transmission Report
Broadcast Report
Protocol Report
Power Saver Timer
Auto Reset
Auto Print
Idle Timeout
Job Cancel
Clock
Audio Tones
Job History Verbose
Auto Paper Selection
User Control
Paper Size Settings
Description
Used to set the image size limit to split the
page when the incoming data is too large for
the output paper.
Used to restrict the paper size of faxes that
can be received.
Used to set whether to print the incoming
Letter size data on Letter paper or A4 paper.
Used to set the remaining memory level to
move to immediate communications during
fax transmission.
Used to set the detection level of an off-the-
hook receiver when using an external phone.
Used to set the region name.
Used to set whether to automatically print
out the results of sent and received
documents that are stored in memory.
Used to set the method used to print fax
transmission results.
Used to set the method of printing
transmission results when "broadcasting"
(sending the same fax to multiple recipients
at once).
Used to set the method used to print
protocols.
Used to set other functions.
Used to set the amount of time the machine
waits before entering its power-saving modes.
Used to set the amount of time the machine
waits before resetting the screen while an
operation is being performed.
Used to set the amount of time the machine
waits before starting to print and after
receiving a print job.
Used to set the amount of time the machine
waits before documents are added.
Used to set whether to automatically cancel
the job when a job error occurs.
Used to set the time on the machine's system
clock.
Used to set the volume of the machine's
audio tones.
Used to set whether to have the machine
automatically print Job History Reports or not.
Used to set the paper tray for the paper size
detected automatically.
Used to restrict the use of the Copy functions. P.201
Used to set the group of standard document/
paper sizes to be detected.
See Page:
P.192
P.193
P.193
P.193
P.194
P.194
P.194
P.195
P.195
P.196
P.197
P.197
P.197
P.197
P.197
P.198
P.198
P.200
P.201
P.201
P.202