About The Default Display Screen; Setting The Default Display - Fuji Xerox DocuCentre S2420 User Manual

3 Product Overview

About the Default Display Screen

The [Default Display] screen lets you change the Default Display Screen — the screen
displayed when turning the power ON and after returning from Energy Saver mode.

Setting the Default Display

You can set the default displayed screen from Copy, Fax, or Scan screen.
Note
1
Press and hold the <Log In/Out> button for at
least 4 seconds.
3
The passcode input screen appears.
Note
2
Use the numeric keypad to enter the passcode,
and then press the <OK> button.
Note
3
In the [Tools] screen, select [Default Display],
and then press the <OK> button.
Note
4
Select the desired default display, and then press
the <OK> button.
76
• Some screens cannot be set on some models.
• The passcode is initially set to "11111"(five "1"
digits).
• The <Log In/Out> button lights up when the
machine is in System Administration mode.
• Select < > or < > button to move the display
up and down.
<Log In/Out> button
System Admin. Passcode
[ ]
System Admin. Passcode
[* * * * * ]
Tools
Custom Paper Size Setting...
Control Panel Language...
Default Display...
Default Display
Copy
Fax
Scan
1 2
4 5
7 8
0