Line Type; Dial Type; Call Interval; Redial Attempts - Fuji Xerox DocuCentre S2420 User Manual

Line Type

Sets the line type to use.
[PSTN] is set at the time of factory shipment.
PSTN
Set for fax transmissions on a standard phone line.
PBX
Set for fax transmissions on an internal private branch exchange within a corporation, or on
a public line.

Dial Type

Sets the dial type.
You can select [PB], [DP (10 PPS)], or [DP (20 PPS)].
Note

Call Interval

Sets the amount of time the machine waits between the end of transmission and the start
of the next.
You can set a value between 3 and 255 seconds (in 1 second increments).
Setting a high Call Interval value increases the total time needed for "broadcast" faxes (sent
to multiple recipients at once), but the machine can receive faxes during the waiting periods.
Note

Redial Attempts

Sets the number of times the automatic redial operation is performed when the recipient is
busy or does not answer.
Note

Redial Interval

Sets the amount of time the machine waits between redials.
You can set a value between 1 and 15 minutes (in 1 minute increments).
The time is set to [5 minutes] at the time of factory shipment.

Junk Filter

Used to set whether to block junk faxes from being received or not.
You can select [On] or [Off].
[Off] is set at the time of factory shipment.
• The default value varies by region. The default value is set when [Region] is set.
• The default value varies by region. The default value is set when [Region] is set.
• The default value varies by region. The default value is set when [Region] is set.
Fax Settings
9
191