Fuji Xerox DocuCentre S2420 User Manual page 273

Error Code
042-614 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
045-310 [Cause]
[Remedy] Removed the jammed paper.
Refer to "Paper Jams" (P.278).
[Cause]
045-313
045-218
[Remedy] Switch off the machine power, make sure that the display is blank,
061-321
061-325
062-277 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
062-300 [Cause]
[Remedy] Close the cover.
062-311 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
062-360 [Cause]
062-371
[Remedy] Switch off the machine power, make sure that the display is blank,
062-380
062-386
062-389
062-396
071-105 [Cause]
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
072-102 [Cause]
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
072-105 [Cause]
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
072-210 [Cause]
072-212
[Remedy] Switch off the machine power, make sure that the display is blank,
072-215
073-102 [Cause]
[Remedy] Remove the jammed paper.
Refer to "Paper Jams" (P.278).
Cause and Remedy
An error occurred.
and then switch on the machine power.
An error occurred.
An error occurred.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
An error occurred in the document feeder.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
The cover was open when a document was placed in the document
feeder.
An error occurred.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
An error occurred.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
An error occurred in the left cover [A] or Tray 1.
An error occurred in the one tray module cover [B] or Tray 2.
A paper jam occurred in the one tray module cover [B].
An error occurred in Tray 2 (One Tray Module).
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
A paper jam occurred in the two tray module cover [C] or Tray 3.
Error Code
13
273