Fuji Xerox DocuCentre S2420 User Manual page 277

Error Code
116-386 [Cause]
[Remedy] Connect the cable securely, and then switch off the machine power,
Refer to "Replacing the Drum Cartridge" (P.230).
116-747 [Cause]
[Remedy] Decrease the value of the Edge Erase or reduce the zoom ratio.
117-326 [Cause]
117-327
[Remedy] Switch off the machine power, make sure that the display is blank,
123-314
127-396 [Cause]
[Remedy] Press the control panel's <Stop> button, and try again.
133-226 [Cause]
[Remedy] Set the country code or time again.
Refer to "Region" (P.194) and "Clock" (P.198).
134-210 [Cause]
134-211
[Remedy] Connect the cable securely, and then switch off the machine power,
Cause and Remedy
The fax cable is not connected correctly.
make sure that the display is blank, and then switch on the machine
power. If the same message is displayed again, contact our
Customer Support Center.
Unable to complete scanning due to the scanning area being too
small.
An error occurred.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
Failed to create an e-mail data.
The specified country code is not supported by the machine or the
time is not set.
An error occurred during fax transmission.
make sure that the display is blank, and then switch on the machine
power. If the same message is displayed again, contact our
Customer Support Center.
Error Code
13
277