3-55 ENGINE
CLUTCH
Clutch pressure plate
Push piece
Clutch drive plate No.1 (T: 3.00)
Clutch driven plate
Clutch drive plate No.2 (T: 3.50)
Clutch push rod
Concaved washer
Washer seat
Clutch sleeve hub
Clutch housing
Oil pump drive gear
• Install the washer
shaft.
NOTE:
Apply engine oil to the inside and outside surfaces of the
spacer.
• Install the primary driven gear assembly
washer onto the countershaft.
NOTE:
When engaging the primary drive and driven gears, turn
the primary driven gear assembly to the counterclockwise.
and spacer onto the counter-
and thrust