Suzuki GZ250 Service Manual page 159

5-41 CHA SSI S
• Install the rear shock absorber and tighten the mounting
bolts and nuts to the specified torque.
Shock absorber mounting bolt/nut: 29 N-m
NOTE:
Install the rear shock absorbers with the spring tension ad-
justing holes facing out.
• Install the rear wheel and rear brake. (See p. 5-35.)
• Adjust the rear shock absorber spring pre-load.
Spring pre-load (STD): 3/5 position
After installing the rear suspension and rear wheel, adjust
the following before riding.
* Drive chain slack .......................................See p. 2-11
* Rear brake pedal free travel .....................See p. 2-14
* Tire pressure..............................................See p. 2-15
(2.9kg-m,21.0lb-ft)