Generator Stator And Pick-Up Coil - Suzuki GZ250 Service Manual

3-41 ENGINE
• Hold the generator rotor with the rotor holder and re-
move the starter clutch bolts.
09930-44913: Rotor holder
REASSEMBLY
• Locate the shim
• Apply a small quantity of THREAD LOCK SUPE R "1303" to
the starter clutch bolts and tighten them to the specified
torque while holding the rot or holder.
99000-32030: THREAD LOCK SUPER "1303"
09930-44913: Rotor holder
bolt: 18 N-m (1.8 kg-m, 13.0 Ib-ft)
GENERATOR STATOR AND PICK-UP
COIL
When replacing the generator stator or pick-up coil
apply THREAD LOCK "1342" to the generator stator set
bolts and pick-up coil set bolts and tighten them.
99000-32050: THREAD LOCK "1342"
to the proper position.
Starter clutch