Suzuki GZ250 Service Manual page 131

• Remove the front fork after loosening the front fork upper
and lower clamp bolts
NOTE:
Slightly loosen the front fork cap bolt
disassembly.
• Remove the front fork cap bolt
and spring
• Invert the front fork and stroke it several times to drain
out the fork oil.
• Hold the front fork in the inverted position for a few min-
utes to allow the fork oil to fully drain.
• Remove the dust seal
• Remove the damper rod bolt
09900-00410: Hexagon wrench set
to facilitate later
, spacer , washer
and oil seal stopper ring
CHASSIS 5-16