Reassembly And Remounting - Suzuki GZ250 Service Manual

INNER AND OUTER TUBES
Inspect the inner tube sliding surface and outer tube sliding
surface for scuffing.

REASSEMBLY AND REMOUNTING

Reassemble and remount the front fork in the reverse order
of removal and disassembly. Pay attention to the following
points:
I !
A CAUTION
* Wash each metal part with cleaning solvent be-
fore reassembly.
* Never reuse fork oil left over from the last serv-
icing.
* Replace the oil seal and dust seal with new
ones during reassembly.
• Hold the inner tube vertically, clean the metal groove and
install the slide metal by hand.
I !
A CAUTION
Do not damage the Teflon coated surface of the
inner tube's slide metal when mounting it.
• Install the outer tube metal , washer and oil seal
to the inner tube.
IA CAUTION]
* When installing the oil seal
tube, protect their seal lips to prevent seal lip
damage.
* Before installing the oil seal, apply SUZUKI SU
PER GREASE "A" to its seal lip lightly.
99000-25010: SUZUKI SUPER GREASE "A"
onto the inner
CHASSIS 5-18