Suzuki GZ250 Service Manual page 157

5-39 CHASSIS
• Remove the swingarm needle bearings using the special
tools.
09923-74510: Bearing remover
09930-30102: Sliding shaft
A CAUTION
The removed needle bearings should be replaced with new
ones.
SWINGA RM
Inspect the swingarm for damage.
If any defects are found, replac e the swingarm with a new
one.
CHAIN BUFFER
Inspect the chain buffer for wear and damage. If any de fects
are found, replac e the chain buffer with a new one.
SWINGARM PIVOT SHAFT
Measure the pivot shaft runout using the dial gauge. If the
pivot shaft exceeds the service limit, replace it with a new
one.
09900-20606: Dial gauge (1/100 mm) 09900-
20701: Magnetic stand 09900-21304: V-
block (100 mm)
Service Limit: 0.3 mm (0.01 in)
REAR SHOCK ABSORBER
Inspect the rear shock absorber for damage and oil leak age.
If any defects are found, replace the rear s hock ab sorber with
a new one.
A CAUTION
Do not attempt to disassemble the rear shock absorber. It
is unserviceable.