Cylinder Head - Suzuki GZ250 Service Manual

REASSEMBLY
Reassemble the cylinder head cover in the reverse order of
disassembly. Pay attention to the following points: •
Apply engine oil to the rocker arm shafts.
• Install the rocker arms
shafts
[ A CAUTION]
Use the new O-rings to prevent oil leakage.
• Tighten the rocker arm shaft bolts to the specified
torque.
Rocker arm shaft bolt: 10 Nm (1.0 kg-m, 7.0 Ib-ft)

CYLINDER HEAD

I A CAUTION |
Identify the position of each removed part. Orga-
nize the parts in their respective groups (i.e., in-
take or exhaust) so that they can be installed in
their original locations.
DISASSEMBLY
• Remove the cam chain tensioner
• Remove the intake pipe
, wave washers and
ENGINE 3-24