To save an imaging setup:
Open the Scanner Setup window.
1
Select the Imaging card.
2
Set the parameters as required in the Imaging card.
3
Set the illumination level, Film Inverse,
Click the Save button.
4
The following window appears on the screen:
2082.tif
[23] Saving an imaging setup
Type the name of the new setup in the Name entry box.
5
Click the Save button to add the new setup to the list.
6
To delete an imaging setup:
Open the Scanner Setup window.
1
Select the Imaging card.
2
Click the Delete button.
3
The following window appears on the screen:
2083.tif
[24] Deleting an imaging setup
Click the setup you want to delete.
4
Click OK to delete the setup.
5
Drawing Size
In the Drawing Size card you can set the parameters related to the drawings to
be scanned or printed as defined in the drawing size file.
Setting up the Océ 3000 Microfilm Scanner
and Mode to the required settings.
ABC
47