Service Modes; Service Modes (For Copier) - Toshiba e-studio191f Service Manual

5 Service Modes

5.1.

Service Modes (For Copier)

These Service Modes are provided to assist the technician in checking for abnormalities in the copier and a
means of making adjustments to the Input/Output of major components.
Caution:
The factory default parameters are preset (country dependent) for optimum performance and in
compliance with the local telecommunication regulations/standards, and do not need to be changed.
Changing some of these parameters may cause the unit to be no longer compliant or become inoperable.
5.1.1. Service Mode Procedure
1. To select the Service Mode
The service mode is selected when the "Function", "Original Size" and the "3" keys are sequentially
pressed, Input the ID to enter the Service Mode (default ID is 00000000) and press the "Set"
F1 will appear in the display.
2. To exit the Service Mode
The service mode is reset when the "Function" and the "Clear" keys are pressed sequentially.
5.1.2. Copier Service Mode Functions
Service
Mode
F1 SELF TEST
F2 SINGLE COPY TEST
F3 CONTI. CPYTEST
F4 I / O STATUS TEST
F5 FUNC. PARAMETERS
F6 ADJ. PARAMETERS
F7 ELECTRONIC COUNTER
F8 SERVICE ADJ.
F9 UNIT MAINTENANCE
Service Modes (For Copier)
Item
00 SCANNER LED TEST
01 LCD/LED TEST
02 PAGE MEMORY TEST
03 PRT TEST PTN. 1
04 PRT TEST PTN. 2
05 PRT TEST PTN. 3
This test is used for checking the Scanner LED.
This test is used for checking the LCD and
LEDs.
This test is used for checking the Page Memory.
Prints the pattern for setting the Paper position
alignment.
Prints the Slant pattern for setting the Paper
position alignment.
Prints the Grid pattern for setting the Paper
position alignment.
One sheet is copied when the Start key is
pressed.
Multi copies are made when the Start key is
pressed.
The functioning of Input / Output items (selected
item numbers) is checked.
Various function settings (selected by code
numbers) can be changed.
Various function settings (selected by code
numbers) can be adjusted.
Electronic Counters for Maintenance
Perform pseudo-operation of an item (selected
by code numbers)
Fax Service Mode
Service Alert Tel #
Firmware Version
Print Device Info.
148
DP-1910F
key, then
Function