Table of Contents
Advertisement
Chapter 1
Introduction
This Administrator's Handbook covers the advanced features of the Motorola Netopia
Router family.
Your Motorola Netopia
the Telnet configuration screen. This Administrator's Handbook documents the advanced features, including
advanced testing, security, monitoring, and configuration. This Administrator's Handbook should be used as a
companion to the Quickstart Guide and the Getting Started Guide. You should read the Quickstart Guide and
the Getting Started Guide before reading this Administrator's Handbook.
What's New in 8.7.4
New in Motorola Netopia® Embedded Software Version 8.7.4 are the following features:
•
Specify Source Address of Outbound Router Traffic. See
•
Ability to support multiple networks over the same IPSec tunnel. See
page
6-17.
•
Backup timer can now be set in seconds instead of minutes. Minimum failure setting has been reduced to
10 seconds. See
•
USB-equipped models now support Macintosh Mac OS X on the USB port.
•
VLAN enhancements. See
•
IP multicast to layer 2 unicast mapping. See
page
3-52.
Corresponding commands have been added to the Command Line Interface (CLI). In addition:
•
DHCP Generic Options support.
•
DHCP filtersets support.
•
Support for router generated packets with their source address outside the local member range for IPSec
force all tunnels.
See the Command Line Interface Commands Reference available on the Motorola Netopia
®
equipment offers advanced configuration features accessed through the Main Menu of
Chapter 8, "Line Backup."
"VLAN Configuration" on page
"Enhanced Dead Peer Detection" on page
3-11.
"IGMP (Internet Group Management Protocol)" on
Introduction 1-1
®
ENT Enterprise-Series
"Multiple Network IPsec" on
®
website.
6-15.
Advertisement
Table of Contents
