Frequency Variants; Other Product Variants; Network Connection; Table 4 - Ptp 300 Series Bridge Frequency Variants - Motorola PTP 300 Series User Manual

Point-to-point wireless bridge
Hide thumbs Also See for PTP 300 Series:
Table of Contents

Advertisement

2.3

Frequency Variants

The PTP 300 Series Bridge has been developed to operate within license exempt frequency
bands. The frequency variants are listed in Table 4.
Variant
PTP
54300
PTP
58300
NOTE
The user must check that local regulations allow the use of these frequency variants.
2.4

Other Product Variants

The PTP 300 outdoor unit (ODU) may be integrated (with its own antenna) or connectorized
(with a separate antenna).
2.5

Network Connection

The network connection to a PTP 300 Series Bridge is made via a 100BaseT Ethernet
connection. Power is provided to the ODU over the 100BaseT Ethernet connection using a
patented non-standard powering technique.
Power is fed into the PIDU Plus from the mains via a standard "figure of eight" mains plug.
Connection between the ODU and PIDU Plus is made using standard CAT5e outdoor UV
resistant cable. Connection between the PIDU Plus and the Network Equipment is made
using standard CAT5e cable.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Table 4 - PTP 300 Series Bridge Frequency Variants

Definition
ETSI 5 GHz Band B
FCC UNII Band
ETSI Band,
FCC ISM Band
Frequency Coverage
5470-5725 MHz
5725-5875 MHz (ETSI) and
5725-5850 MHz (FCC)
14
2 Product Description
Variable
Channel
Channel
Raster
Width
5, 10, 15
5 MHz
MHz
5, 10, 15
5 MHz
MHz

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptp 500 series

Table of Contents