Engine Mount, Clutch Release Cylinder (Mtx) And Engine Mount Member - Mazda 323 Workshop Manual Supplement

Bl
INSTALLATION
Engine mount, clutch release cyiinder
(MTX)
and
engine
mount member
1. Install the No.3
engine
mount rubber, and loosely tighten
the bolt and nuts.
2. Install the No.4 engine
mount rubber and
bracket assem-
bly, and loosely tighten the
k~olts and nuts.
3. Install the clutch release cylinder and pipe bracket assem-
U-y.
(MTX)
Tightening torque
@: 16-23 Nm (1.6-2.3 m-kg, 12-47 ft-lb)
@: 6.9-9.8
N-m (70-100 cm-kg, 61-87 Mb)
I
93GOBl-72
J
. - , , . . , .
I
93GOBi-713
4. Install the No.2 engine mount rubber and bracket assembly.
Tightening torque:
37-52 Nm (3.8-5.3
m-kg, 27-38 ft-lb)
5. Align the engine mount member to the No.1 and No.2 en-
gine mount bolts, and loosely tighten the nuts.
6. Install and tighten the engine mount member bolt
and nuts.
Tightening torque:
64-89 N-m (6.5-9.1 m-kg, 47-66
ft-Lb)
7. Tighten the No.7 and No.2 engine mount nuts.
Tightening torque:
37-52 Mm (3.8-5.3
m-kg, 27-38 ft.lb)