Esim Commands; About The Command Syntax - Intermec PC4 Programmer's Reference Manual

Chapter 4 — ESim Commands

ESim Commands

About the Command Syntax

30
This chapter lists the various commands in alphabetical order. Each
command is followed by a short description, the syntax for the
command, an explanation of the parameters included in the syntax,
and an example of how to use the command.
To learn more about ESim commands, see
reorganized chapters" on page 2.
Commands that begin with ^ are listed alphabetically by the letter that
follows ^.
In the command syntax, there are a few conventions for substituting
data or indicating how you can use data:
• p - p indicates parameters, which are listed separately below the
1 n
command syntax.
• Square brackets [ ] indicate optional parameters or data.
• Vertical lines | indicate alternatives
• "Name" indicates you need to enter the name of a form or graphic
within the quotation marks such as "Intermec".
• "Data" indicates that the data could be from another source such
as a .pcx file, a database, or data entry. "Data" designates the place
in the command sequence to insert the data.
Because firmware uses " " (ASCII 34 decimal), a special designator
is required to print text or bar codes that include quotation marks.
The backslash character \ (ASCII 92 decimal) serves that purpose.
Examples are shown in the table below.
Printing Examples
Print
"
"ABC"
ESim for the PC4 and PF8 Printers Programmer's Reference Manual
Enter
"\""
"\"ABC\""
"Added new content and