NTP
The Network Time Protocol (NTP) synchronizes the internal clocks of computers over a network
connection at system startup and every subsequent 24-hour period thereafter. If your printer uses DHCP
and an NTP server, or if a DHCP server provides Greenwich Mean Time (GMT) offset, these settings are
ignored.
In CentreWare Internet Services, click Properties > Connectivity > Setup.
1.
Under Protocol, next to NTP, click Edit.
2.
3.
Under NTP Enabled, select Enabled.
Select IPV4 Address or Host Name.
4.
5.
Under IP Address: Port and Alternate IP Address: Port, type the address and port numbers.
6.
Click Save.
7.
For the new settings to take effect, restart your printer.
WorkCentre 7800 Series Multifunction Printer
System Administrator Guide
Network Connectivity
59