Macintosh; Requirements; Quick Cd-Rom Install Steps; Enabling And Using Ethertalk For Mac Os 9.X - Xerox C2424 - WorkCentre Color Solid Ink User Manual

Macintosh

This topic includes:
■ "Requirements" on page 6-31
"Quick CD-ROM Install Steps" on page 6-31
■
■ "Enabling and Using EtherTalk for Mac OS 9.x" on page 6-31
■ "Enabling and Using TCP/IP for Mac OS 9.x" on page 6-32
"Enabling or Using TCP/IP or AppleTalk for Mac OS X, Version 10.1 and Higher" on
■
page 6-34
■ "Macintosh Troubleshooting (Mac OS 9.x, Mac OS X, Version 10.1 and Higher)" on
page 6-35
■ "infoSMART Knowledge Base Documents (English only)" on page 6-36

Requirements

■ A workstation with the appropriate device driver installed.
■ A working knowledge of the operating system (OS 9.x or higher) being used on the
workstation.
Proper cabling to connect the system to the network.
■

Quick CD-ROM Install Steps

1.
Insert the WorkCentre C2424 Software CD-ROM into the computer's CD-ROM drive.
2. Double-click the installer on the software CD-ROM to install the device driver.

Enabling and Using EtherTalk for Mac OS 9.x

If you use EtherTalk, Macintosh computers do not require IP addresses.
1. Open the AppleTalk Control Panel. Verify that the Ethernet port is the selected network
port.
2. Open the Chooser, then click the LaserWriter printer driver.
3. Select the system.
4. Click Create to create the desktop system.
WorkCentre® C2424 Copier-Printer
6-31

Macintosh