Table of Contents
Advertisement
2
3
Setting Independent Key Transition DME Wipe
Modifiers
You can add modifiers such as pattern position and size for an independent key
transition DME wipe.
For introductory information, see "Positioner" (page 75) and "Size" (page
76).
Setting the DME wipe position (Positioner)
For applicable pattern numbers, see page 75.
1
2
424
DME Wipe Settings for Independent Key Transitions
Select the desired DME wipe pattern group with one of the following
buttons.
In two-channel mode, only Page Turn and Page Roll are selectable.
• Slide/Squeeze: slide and squeeze
• Split/Door: split and door
• Mirror/Sphere: mirror and sphere
• Character Trail: character trail
• Wave/Ripple: wave and ripple
• Page Turn/Roll: page turn and page roll
• Frame I/O: frame in/out
• 2D Trans/3D Trans: 2D Trans and 3D Trans
• Sparkle/Split Slide: sparkle and split slide
• User Program: user programmable DME
For details of DME wipe patterns, see "Types of DME Wipe Pattern"
(page 67) and "DME Wipe Pattern List" in Appendix (Volume 1) (page
500).
The patterns from the selected pattern group appear on the screen.
Press the button to select the desired pattern.
In the <Position> group of the Key1 DME Wipe Adjust menu, press
[Position], turning it on.
Set the following parameters.
Knob
Parameter
Adjustment
1
H
Horizontal position
2
V
Vertical position
Setting values
–200.00 to +200.00
–200.00 to +200.00
Advertisement
Table of Contents
