Show Flexible-Tier-Mode - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.2 Flexible Tier Management > show flexible-tier-mode

show flexible-tier-mode

This command displays the setting status of the Flexible Tier function.
■
Syntax
show flexible-tier-mode
■ Parameter
No parameters.
■ Output
# Flexible Tier Mode [Enable]
A: It shows whether the Flexible Tier function is enabled.
■ Example(s)
The following example displays the setting status of the Flexible Tier function:
CLI> show flexible-tier-mode
Flexible Tier Mode [Disable]
CLI> show flexible-tier-mode
Flexible Tier Mode [Enable]
A
92
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0