Delete Eco-Schedule - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > delete eco-schedule

delete eco-schedule

This command deletes an ECO schedule(s) or a single ECO schedule event. One or more ECO schedules can be
deleted at the same time. Only one ECO schedule event can be deleted at the same time.
■ Syntax
delete eco-schedule {-schedule-number
[-event-number {1|2|3|4|5|6|7|8}]
■ Parameter
-schedule-number
or
-schedule-name
-event-number
■ Example(s)
The following example will delete the ECO schedule named "SC002":
CLI> delete eco-schedule -schedule-name SC002
The following example will delete ECO schedule event #2 in the ECO schedule named "SC001":
CLI> delete eco-schedule -schedule-name SC001 -event-number 2
The following example will delete both the ECO schedule named "SC002" and "SC003" at the same time:
CLI> delete eco-schedule -schedule-name SC002,SC003
This parameter specifies the ECO schedule identifier. One or more parameters can be specified.
However; if an event-number is also specified, then only one ECO schedule identifier can be
specified. For details, refer to
Optional. This parameter specifies the ECO schedule event number to be deleted. The ECO
schedule event number is a value from 1 to 8 and can be displayed by using the "show eco-
schedule" command. Only one event number can be specified. If the event-number is omitted,
the ECO schedule is deleted.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
schedule_numbers
| -schedule-name
"1.2.13 ECO Schedule Syntax" (page
137
schedule_names
}
25).
P2X0-1030-09ENZ0