Set User - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.1 User Management > set user

set user

This command changes the information of an existing user account. A user name cannot be changed. A
currently logged in user account can be used, and any changes are enabled after the next login.
■ Syntax
set user -name
■ Parameter
-name
-role
-function
■ Example(s)
This example changes the role of the user account named "user1" to the Administrator Role:
CLI> set user -name user1 -role Admin -function enable
name role
[-role ] [-function {enable | disable}]
This parameter specifies the user name. Only one user name can be specified at the same
time.
Optional. This parameter specifies the role. If omitted, the existing setting is not changed.
Total Administrator role
Maintainer Maintenance operator
SecurityAdmin
Security administrator
AccountAdmin
Account administrator
StorageAdmin
ETERNUS DX Disk storage system administrator
Administrator
Total administrator
Monitor Monitor
Software Software
Custom role
Role that is created using the "create role" command.
Optional. This parameter specifies whether the modified user account is enabled. If this
parameter is omitted, "enable" is set.
enable The user account created is enabled immediately (default).
disable The user account is created but not enabled.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
363
P2X0-1030-09ENZ0