Set Sed-Authentication - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > set sed-authentication

set sed-authentication

This command sets the authentication key for Self-Encrypted Disks (SEDs). SEDs are used to prevent the
leakage of data in case a disk is stolen or lost.
■ Syntax
set sed-authentication -execution {yes|no}
■ Parameter
-execution
■ Example(s)
The following example sets the authentication key for an SED:
CLI> set sed-authentication
This parameter sets the authentication key for SEDs.
yes The authentication key for SEDs is set.
no The authentication key for SEDs is not set (default).
-execution yes
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
577
P2X0-1030-09ENZ0