Show Advanced-Copy-Sessions - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > show advanced-copy-sessions

show advanced-copy-sessions

This command displays a list of the Advance Copy sessions that are being started. The number of sessions for
each Advanced Copy type can be displayed when all parameters are omitted. A list of the sessions that are to
be displayed can be narrowed down to the Advanced Copy type, the requester, and the volume type. Details
for a session can also be displayed by specifying the session-ID, which is the number used to identify a
session. Note that only one session can be displayed at a time.
The status of some reserved copy sessions may be displayed as "Reserved" immediately after the session
starts. The type of sessions in Reserved status can only be distinguished as being either OPC, EC, XCOPY, or
ODX. In this case, sessions that are distinguished as OPC or EC may be determined as being another type of
session once the type of copy session can be confirmed.
■ Syntax
show advanced-copy-sessions
[ -session-id
[-requestor {all|gui|cli|guicli|smis|scsi|lan}] [-volume-type {all|open|standard}] ]
■ Parameter
-session-id
-type
id | -type {all|ec|opc|qopc|sopc|sopc+|mon|rec|xcopy|odx}
Optional. This parameter specifies the session ID that is to be used to display details. The
session ID is the number to identify a session. Only one session ID can be displayed at a time.
If this parameter is omitted, the details cannot be displayed.
This parameter cannot be specified with other parameters.
Optional. This parameter specifies the Advanced Copy type that is used to display a list of the
sessions. If this parameter is omitted, the Advanced Copy type cannot be narrowed down.
• This parameter can be specified with the "-requestor" and "-volume-type" parameters.
• The "-session-id" parameter cannot be specified with this parameter.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
401
P2X0-1030-09ENZ0