Delete Host-Response - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > delete host-response

delete host-response

This command deletes specified host response.
■
Syntax
delete host-response {
-host-response-number
-host-response-name
■ Parameter
-host-response-number
or
-host-response-name
■ Example(s)
The following example deletes the host responses with consecutively numbered identifiers #1 - #3:
CLI> delete host-response -host-response-number 1-3
The following example only deletes the host response named "HOSTRESP1":
CLI> delete host-response -host-response-name HOSTRESP1
host_response_numbers
host_response_names
This parameter specifies the host response identifiers to be deleted. Host response #0 is the
system default and it cannot be deleted. One or more parameters can be specified at the same
time. For details, refer to "1.2.12 Host Response Syntax" (page
Host responses with the following combination of numbers and names cannot be deleted.
• No.0 Default
• No.250 Solaris MPxIO
• No.251 HP-UX
• No.252 AIX EMPD
• No.253 AIX VxVM
• No.254 AIX Single Path
• No.255 VS850/SVC
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
|
}
296
24).
P2X0-1030-09ENZ0