Create Odx-Buffer-Volume - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > create odx-buffer-volume

create odx-buffer-volume

This command creates the ODX Buffer volume. The ODX mode setting must be enabled. Only one ODX Buffer
volume can be registered for an ETERNUS Disk storage system (multiple ODX Buffer volume cannot be
created).
■ Syntax
create odx-buffer-volume -name name {-rg-number
-pool-number
-type {open|standard|tpv|ftv} -size {
attention
[-attention
■ Parameter
-name
-rg-number
or
-rg-name
-pool-number
or
-pool-name
-ftrp-number
or
-ftrp-name
-type
-size
pool_number
| -pool-name
size
{tb|gb|mb}|max} [-priority {
] [-encryption {enable|disable}]
This parameter specifies the name for the ODX Buffer volume. Only one name can be
specified. For details about the contents that can be entered, refer to
Syntax" (page 20).
This parameter specifies the identifier of the RAID group in which the ODX Buffer volume is
to be created. For details, refer to
be set when "open" or "standard" are set for the "-type" parameter.
This parameter specifies the identifier of the TPP in which the ODX Buffer volume is to be
created. For details, refer to
can be specified when "tpv" is set for the "-type" parameter.
This parameter specifies the identifier of the FTRP in which the ODX Buffer volume is to be
created. For details, refer to
be specified when "ftv" is set for the "-type" parameter.
This parameter specifies the volume type of the ODX Buffer volume.
open Standard volume (Standard). "open" type volumes that are created are
displayed as standard volumes.
standard Normal open volumes (Standard)
tpv Thin Provisioning Volume (TPV)
ftv Flexible Tier Volume (FTV)
This parameter specifies the size of the ODX Buffer volume. Select whether terabytes (TB),
gigabytes (GB), or megabytes (MB) are used for the capacity. From 1GB to 1TB can be
specified.
Example: 1tb (1TB), 120gb (120GB), 1024mb (1024MB)
max Specify this option to create an ODX Buffer volume with the same capacity as
the largest free capacity in the specified RAID group. This option can be speci-
fied only when the volume type is Standard (Open).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_number | -rg-name
pool_name ftrp_number
| -ftrp-number
"1.2.8 RAID Group Syntax" (page
"1.2.5 Thin Provisioning Pool Syntax" (page
"1.2.6 Flexible Tier Pool Syntax" (page
189
rg_name |
ftrp_name
| -ftrp-name
ftsp_number
|auto}]
"1.2.4 Alias Name
22). This parameter can
20). This parameter
21). This parameter can
P2X0-1030-09ENZ0
}