Show Lu-Qos-Groups - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show lu-qos-groups

show lu-qos-groups

This command displays detailed settings of the LU QoS Group.
■
Syntax
show lu-qos-groups [-lu-qos-group
■ Parameter
-lu-qos-group
-lun
■
Output
When a list of the LU QoS Groups is displayed
#CLI> show lu-qos-groups
#LU QoS Group
#No.
# 0
# 1
# 2
A
A: Registered LU QoS Groups
When the LU QoS Groups to display detailed information for are specified
# LU QoS Group No.1
# LUN Bandwidth Limit
# 3
# 4
A B
# LU QoS Group No.2
# LUN Bandwidth Limit
# 6
A B
A: Registered LU QoS Groups
B: Bandwidth Limit value that is set to the LU QoS Group
lu_qos_group_number
Optional. This parameter specifies the LU QoS Group to display detailed information.
Optional. This parameter specifies which Host LUNs to display detailed information for.
When "all" is specified, the information for the LUNs with "0" (Unlimited) as the Bandwidth
Limit is also displayed. If omitted, the information for the LUNs with "0" (Unlimited) as the
Bandwidth Limit is not displayed.
1
14
1
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
lun
] [-lun |all]
331
P2X0-1030-09ENZ0