Set Rec-Disk-Buffer - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > set rec-disk-buffer

set rec-disk-buffer

This command assigns REC disk buffers with the REC buffer.
■
Syntax
set rec-disk-buffer -partition {0|1|2|3|4|5|6|7} {-rg-number
■ Parameter
-partition
-rg-number
or
-rg-name
■ Example(s)
The following example assigns an REC disk buffer which has RG number 0 to REC buffer partition 1:
CLI> set rec-disk-buffer -partition 1 -rg-number 0
The following example assigns two REC disk buffers which are named REC001 and REC002 to REC buffer
partition 2:
CLI> set rec-buffer -partition 2 -rg-name REC001, REC002
This parameter specifies the partition number for which an REC buffer is to be defined. The
partition numbers that can be specified for each storage system model are as follows:
ETERNUS DX90 S2: 0 to 3
ETERNUS DX410 S2/DX440 S2: 0 to 7
ETERNUS DX8100 S2/DX8700 S2: 0 to 7
This parameter specifies the RAID group identifier of the REC disk buffer for assignment of the
REC buffer. One to four parameter(s) can be specified. For details, refer to
Syntax" (page 22).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_number
445
rg_name
| -rg-name }
"1.2.8 RAID Group
P2X0-1030-09ENZ0