Show Sed-Key-Servers - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show sed-key-servers

show sed-key-servers

This command displays the key server.
■
Syntax
show sed-key-servers [-server-id
■ Parameter
-server-id
■ Output
# Server ID
# Server
# Port Number
# Port
#
# Server ID
# Server
# Port Number
# Port
A: Key server ID
B: FQDN or IP address (IPv4 or IPv6) of the key server
C: Port number of the key server
D: It shows which LAN port is used.
■ Example(s)
The following example displays the key server information:
CLI> show sed-key-servers
Server ID
Server
Port Number
Port
Server ID
Server
Port Number
Port
The following example displays the key server information when the server ID is 1:
CLI> show sed-key-servers -server-id 1
Server ID
Server
Port Number
Port
server_id
Optional. This parameter specifies the key server IDs that are to be displayed. 1 or 2 can be
specified. Multiple key server IDs can be specified at the same time. If this parameter is
omitted, all of the server information is displayed.
1
A
10.21.134.198
B
5696
C
RMT
D
2
-
5696
MNT
1
10.21.134.198
5696
RMT
2
-
5696
MNT
1
10.21.134.198
5696
RMT
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
]
592
P2X0-1030-09ENZ0