Show Lun-Groups - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show lun-groups

show lun-groups

This command displays a list of existing LUN groups. If no parameters are specified, a summary list of all the
existing LUN groups is displayed. If LUN groups are specified, then the details of the associated volumes and
LUNs are displayed.
Multi-group volume information, which indicates whether or not the same volume is defined for multiple
LUN groups, is a status flag.
■ Syntax
show lun-groups [-lg-number
■
Parameter
-lg-number
or
-lg-name
■ Output
When the parameter is omitted, a summary of all the existing LUN groups is displayed.
# LUN Group
# No. Name
# 6 AG006
A B
A: LUN group number
B: LUN group name
C: It shows whether or not the same volume identifier is defined between LUN groups.
If the same definitions exist, "Yes" is displayed in target LUN groups. Otherwise, "No" is displayed.
lg_numbers
Optional. This parameter specifies the LUN group identifiers that will be displayed in detail.
One or more parameters can be specified. If omitted, a summary of all the existing LUN
groups will be displayed.
Multi-Group
Volumes
Yes
C
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
lg_names
| -lg-name ]
267
P2X0-1030-09ENZ0