Show Port-Groups - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show port-groups

show port-groups

This command displays a list of existing affinity groups.
■
Syntax
show port-groups
[-port-group-number
■ Parameter
-port-group-number
or
-port-group-name
-all
■ Output
When the parameter is omitted, a summary of all the existing port groups is displayed.
# Port Group
# No. Name
# 0 pg
A B
# 1 pg1
# 2 pg01
# 3 pg0d1
# 4 FCoEPG#0
A: Port group number
B: Port group name
C: CA type
port_group_numbers
Optional. This parameter specifies the port group identifiers that will be displayed in detail.
One or more parameters can be specified. If omitted, a summary of all the existing port groups
will be displayed. For details, refer to
Optional. When this parameter is specified, the details of all the existing port groups are
displayed.
CA Type
FC
C
FC
FC
FC
FCoE
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
port_group_names
| -port-group-name
"1.2.15 Port Group Syntax" (page
315
| -all]
26).
P2X0-1030-09ENZ0