Create Thin-Pro-Pool - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > create thin-pro-pool

create thin-pro-pool

This command creates a Thin provisioning pool with the specified Thin provisioning pool name, disk attribute,
reliability, encryption, and a RAID group. The Thin provisioning pool is formatted automatically after it is
created. When registering a hot spare, refer to the "set global-spare" or the "set dedicated-spare" command.
■ Syntax
create thin-pro-pool -name
-level {0|1|5|6|10} [-warning
-rg-mode {auto|manual} [-capacity capacity] [-disks
[-assigned-cm {0|1|cm0cpu0|cm0cpu1|cm1cpu0|cm1cpu1|cm2cpu0|cm2cpu1|cm3cpu0|cm3cpu1|
cm4cpu0|cm4cpu1|cm5cpu0|cm5cpu1|cm6cpu0|cm6cpu1|cm7cpu0|cm7cpu1| auto}]
[-encryption {enable|disable}] [-stripe-depth { 64kb | 128kb | 256kb | 512kb | 1024kb }]
■ Parameter
-name
-attribute
-level
-warning
-attention
-rg-mode
alias_name
warning
] [-attention
This parameter specifies the alias name of a Thin provisioning pool. Only one name can be
specified. For details, refer to
This parameter specifies the disk attribute of a Thin provisioning pool.
online Online disks
nearline Nearline disks
ssd SSDs
sed SEDs
This parameter specifies the RAID level.
0 RAID0
1 RAID1
5 RAID5
6 RAID6
10 RAID1+0
Optional. This parameter specifies the warning level of the Thin provisioning pool. The settable
range is 5 – 99%. If this parameter is omitted, the default value (90%) is set. The warning level
range should be equal to or higher than the "-attention" setting range.
Optional. This parameter specifies the attention level of the Thin provisioning pool. The
settable range is 5 – 80%. If this parameter is omitted, the default value (75%) is set. The
attention level range should be equal to or lower than the "-warning" setting range.
This parameter specifies the method of selecting the disk when creating the RAID group.
auto The disk is automatically allocated. The capacity of the disk is specified with the -
capacity parameter.
manual The disk is manually allocated. The disk is specified with the -disks parameter.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
-attribute {online|nearline|ssd|sed}
attention
]
disks
]
"1.2.4 Alias Name Syntax" (page
74
20).
P2X0-1030-09ENZ0