Set Host-Wwn-Name - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-wwn-name

set host-wwn-name

This command changes an existing FC or FCoE host identifier.
■
Syntax
set host-wwn-name {-host-number
name
[-name
-host-response-name
■ Parameter
-host-number
or
-host-name
-wwn
-name
-host-response-number
or
-host-response-name
■ Example(s)
The following example changes the host response definition of the host named "HBA1":
CLI> set host-wwn-name -host-name HBA1 -host-response-number 2
The following example changes the host response definition of the FC hosts with consecutively numbered
identifiers #1 – #10 at the same time:
CLI> set host-wwn-name -host-number 1-10 -host-response-number 5
The following example changes the host named "HBA1". The new alias is "HBA123":
CLI> set host-wwn-name -host-name HBA1 -name HBA123
host_number
] [-host-response-number
host_response_name
This parameter specifies the FC or FCoE host identifier to be changed. If only the host response
identifier is being set, then two or more FC or FCoE host identifiers can be specified at the same
time. If not, then only one can be specified. For details, refer to
Optional. This parameter specifies the WWN to be changed. The WWN is a 16-byte
hexadecimal number. Only one parameter can be specified at the same time. If omitted, the
existing setting is not changed.
Example: -wwn 40000000abc78856
Optional. This parameter specifies the host WWN alias. Only one parameter can be specified at
the same time. For details, refer to
existing setting is not changed.
Optional. This parameter specifies the host response identifier to be changed. One or more
parameters can be specified at the same time. For details, refer to
Syntax" (page 24). If omitted, the existing setting is not changed.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
host_name
| -host-name
host_response_number
|
]
"1.2.4 Alias Name Syntax" (page
229
wwn
} [-wwn ]
"1.2.10 Host Syntax" (page
20). If omitted, the
"1.2.12 Host Response
P2X0-1030-09ENZ0
23).