Chapter 4 Function/System Settings And Display; User Management; Role - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4
Function/System Settings and Display
This chapter explains the commands related to the following functions:
• User account management
• Advanced Copy management
• Network management (Redundant IP/SNMP etc.)
• SSH/SSL security configuration
• Date and Time/NTP
• System configuration (ETERNUS DX Disk storage system name, Box ID, encryption)
• Power synchronization
• Self-Encrypted Disk (SED) authentication settings
• syslog server settings
• Audit log settings
• Key management server linkage function
• Shutdown/system restart
4.1

User Management

This section explains the commands that manage a user account and a password.
4.1.1

Role

Roles define the user roles and the policies based on the definitions that are assigned to each role. Policies
are given to users as roles. There are default roles that are preset in the ETERNUS DX Disk storage system and
user-defined roles (custom roles). The following table shows the roles and their policies.
■ Default roles
The default roles and corresponding policies are shown in the following table.
User policy
Status Display
RAID Group Management
Volume - Create / Modify
Volume - Delete / Format
Host Interface Management
Advanced Copy Management
Storage
Monitor Admin
Admin
Yes Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
356
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Default role
Account Security
Maintainer
Admin Admin
Yes Yes
Yes
Yes
Yes
Yes
Yes
Software
(*1)
P2X0-1030-09ENZ0