Show Raid-Groups - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > show raid-groups

show raid-groups

This command displays a summary list of all the RAID groups or the details of a specified RAID group(s).
■
Syntax
show raid-groups [-rg-number
■ Parameter
-rg-number
or
-rg-name
■ Output
# RAID Group
# No. Name
# 1 RAIDGROUP001 RAID1+0 CM#0
A B
# <Disk List>
# Disk
# CE-Disk#3
J
A: A RAID group number
B: A RAID group name
C: A RAID level
D: Assigned CM number, CM number to control a RAID group
E: RAID group status
F: Total capacity (Unit: MB)
G: Free capacity (Unit: MB)
H: Stripe Depth (Unit: MB) (Only when viewing details and the stripe size is not 64KB)
I: Usage status of the key groups (Only when viewing details)
J: Disk location included in a RAID group (Only when viewing details)
K: Disk status included in a RAID group (Only when viewing details)
L: Disk usage included in a RAID group (Only when view details)
M: Pair disk information in case of RAID1 or RAID1+0 (Only when viewing details)
rg_numbers
Optional. This parameter specifies RAID group. One or more RAID groups can be specified.
For details, refer to "1.2.8 RAID Group Syntax" (page
omitted, a summary list of all the RAID groups is displayed.
RAID Assigned Status
Level CM
Spare in Use
C D E
Status
Available
K
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_names
| -rg-name ]
Total Free
Capacity(MB) Capacity(MB) Depth(KB) Group
134656 132535
F G
Usage Mirroring
Data CE-Disk#5
L M
118
22). If the RAID group identifier is
Stripe Key
1024 Enable
H I
P2X0-1030-09ENZ0