Create Snmp-User - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > create snmp-user

create snmp-user

This command creates SNMP user settings.
■
Syntax
create snmp-user -name
[-authentication-method {md5 | sha}] [-encryption {enable | disable}]
■ Parameter
-name
-view
-authentication
-authentication-method
-encryption Optional. This parameter specifies the encryption mode. If this parameter is set to enable, the
■ Example(s)
The following example creates the MIB user named "snmpuser1" with view "view13":
CLI> create snmp-user -name snmpuser1 -view view13
Authentication Password:
Confirm Authentication Password:
Encryption Password:
Confirm Encryption Password:
user_name
-view {mib_view_name|""} [-authentication {enable | disable}]
This parameter specifies the SNMP user name. Up to 10 SNMP user names can be specified. It
is a unique name. Between 8 and 32 characters can be specified for a name.
This parameter specifies the MIB view name. Up to 32 characters can be specified for a view
name. Specify double quotation marks ("") to not specify a view name.
Optional. This parameter specifies whether to enable authentication. If it is specified, the "-
authentication-method" and "-encryption" options can be specified. In addition, the ETERNUS
DX Disk storage system confirms the authentication password. Between 8 and 64 characters
can be used for the password. If omitted, it is enabled.
enable Authentication is enabled (default).
disable Authentication is disabled.
Optional. This parameter specifies which authentication method is used. One of the following
methods can be selected.
md5 MD5 (default)
sha SHA
ETERNUS DX Disk storage system confirms the encryption password. Between 8 and 64
characters can be used for the password.
enable Encryption is enabled (default).
disable Encryption is disabled.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
483
P2X0-1030-09ENZ0