Specifying A Port And Setting Lun Mapping - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Appendix D Basic Setting Examples
D.2 Settings for Various Host Accesses
Example
CLI> show
LUN Group No.0
LUN Group Name
LUN Volume
No.
0 8 v0
20 10 v2
The "set affinity-group" and "delete affinity-group" transfer the LUN mapping that is set by specifying a port
group to the LUN mapping setting for each port, and keep the LUN mapping separate from the affinity group
setting when changing the affinity group setting. As a result, the LUN mapping is not changed.
Example
CLI> set affinity-group -ag-name AG002 -volume-name v1 -lun 1
CLI> show mapping
CM#0 CA#0 Port#0 (Host Affinity Mode Disable)
LUN Volume
No.
20 10 v2
CM#0 CA#0 Port#1 (Host Affinity Mode Disable)
CM#1 CA#0 Port#0 (Host Affinity Mode Disable)
LUN Volume
No. Name
20 10 v2
CM#1 CA#0 Port#1 (Host Affinity Mode Enable)
Example
CLI> show affinity-group -ag-name AG002
Affinity Group No.0
Affinity Group Name
LUN Volume
No.
1 9 v1
20 10 v2
D.2.3

Specifying a Port and Setting LUN Mapping

An example of creating host access is shown below. For more details, refer to
Management" (page
The example shown below is the case for the Fibre Channel interface.
Procedure
1
Disable the host affinity mode of host interface ports 000 and 001.
CLI> set fc-parameters -port 000,001 -host-affinity disable
2
Set the connection topology of host interface ports 000 and 001 to fabric.
CLI> set fc-parameters -port 000,001 -connect fabric
lun-group -lg-name AG002
AG002
Status
Name
Status
Name
Available
Status
Available
AG002
Status
Name
Available
Available
193).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Size(MB) Multi-Group
Available
Available
Size(MB)
Size(MB)
512
Size(MB) Multi-Group
745
Volume
512 No
512 No
512
Volume
512 No
512 No
"3.5 Host Interface
P2X0-1030-09ENZ0