Import Ssl-Kmip-Certificate - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > import ssl-kmip-certificate

import ssl-kmip-certificate

This command imports and registers in the ETERNUS DX Disk storage system the server certificate that is
signed by a certificate provider.
■ Syntax
import ssl-kmip-certificate -port {maintenance | remote | fst} -server
-user login_user_account
■ Parameter
-port
-server
-user
-filename
-indicator
■ Example(s)
The following example imports and registers the signed certificate:
CLI> import ssl-kmip-certificate -port maintenance -server ftp.example.com -user cli-user filename server.cert
-filename -filename
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to "1.11 Note for Specifying FTP Server" (page
maintenance
MNT port
remote RMT port
fst FST port (not supported in the ETERNUS DX80 S2/DX90 S2)
This parameter specifies the FTP server name in which the certificate file is to be stored. The
server name format is IPv4 standard notation (as a string in the base 256 notation d.d.d.d),
IPv6 address format or a fully qualified domain name (FQDN).
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
This parameter specifies the user name that is to be used to access the FTP server. When this
parameter is specified, the command displays an FTP server password prompt.
This parameter specifies the certificate file name.
Optional. This parameter specifies whether the progress indicator is displayed. If omitted, the
progress indicator is displayed.
enable Progress indicator is displayed.
disable Progress indicator is not displayed.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
server_name
[-indicator {enable | disable}]
31).
593
P2X0-1030-09ENZ0