Adjusting The Tension Of Original Feed Belt - Kyocera TASKalfa 620 Service Manual

2KN/2KP-1

(4) Adjusting the tension of original feed belt

Perform the following adjustment if no original feed or multiple sheets of original occurs for feeding from DP.
Procedure
Does multiple sheets of
1-5-82
Start
Place the some original
sheets on the DP.
Press the start key and
make a test copy.
original feed occur?
No
Does no original
feed occur?
No
End
Refit the upper original cover and
close the document processor cover.
Open the document processor cover
and remove the upper original feed
Yes
cover (see page 1-5-75).
Remove the lever using the flat-blade
screwdriver and move the lever in
the direction of the black arrow (
Open the document processor cover
and remove the upper original feed
Yes
cover (see page 1-5-75).
Remove the lever using the flat-blade
screwdriver and move the lever in
the direction of the white arrow (
Adjusting lever
).
).
Figure 1-5-171