Detaching And Refitting The Ozone Filters - Kyocera TASKalfa 620 Service Manual

(6) Detaching and refitting the ozone filters

Follow the procedure below to replace the ozone filters.
Procedure
1. Remove two screws and then remove the
rear duct A.
Remove three screws and then remove the
rear duct B.
2. Remove ozone filter 1 from the rear duct A.
3. Remove three ozone filter 2 from the rear
duct B.
4. Replace ozone filter 1 and 2, and then
attach the filters.
5. Refit the rear duct A and B.
Rear duct B
Figure 1-5-181
Rear duct A
Figure 1-5-182
Ozone filter 2
Rear duct B
Figure 1-5-183
2KN/2KP
Rear duct A
Ozone filter 1
1-5-87