Kyocera TASKalfa 620 Service Manual page 127

Maintenance
item No.
Checking/clearing counts by optional devices
U905
Description
Displays or clears the counts of the DP, optional document finisher or side feeder.
Purpose
To check the use of the DP, optional document finisher and side feeder. Also to clear the counts after replacing
consumable parts.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the device, the count of which is to be checked. The count of the selected device is displayed.
Display
DP
FINISHER
FEEDER
DP
Display
ADP
RADP
Document finisher
Display
CP CNT
STAPLE
PUNCH
STACK
SADDLE
Side feeder
Display
LCT COUNTER
Clearing
1. Select the item to be cleared. The selected item is displayed in reverse.
To clear the counts for all, press the reset key.
2. Press the start key. The count is cleared.
To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item.
The screen for selecting a maintenance item No. is displayed.
Resetting partial operation control
U906
Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the drawers or other sections, and the
related parts are serviced.
Method
1. Press the start key.
2. Press EXECUTE on the touch panel.
3. Press the start key to reset partial operation control.
The maintenance mode is exited, and the machine returns to the same status as when the main power
switch is turned on.
Description
Description
Document processor
Ducument finisher
Side feeder
Description
Number of single-sided originals that has passed through the DP
Number of double-sided originals that has passed through the DP
Description
Number of copies that has passed
Frequency the stapler has been activated
Frequency the punch has been activated
Frequency the stacker has been activated
Frequency the center holding has been activated
Description
Number of copies that has passed through the side feeder
2KN/2KP
1-3-89