Detaching And Refitting The Drum Heater Electrode - Kyocera TASKalfa 620 Service Manual

Hide thumbs Also See for TASKalfa 620:

Table of Contents

(3) Detaching and refitting the drum heater electrode

Follow the procedure below to replace the drum heater electrode.

1. Open the front cover. Turn lever A2 to left.

2. Remove the screw and then remove the

3. Remove the connector.

4. Release two projections and remove the

inner cover.

5. Remove the connector and screw, and then

remove the drum heater electrode.

6. Replace the drum heater electrode and refit

the electrode.

7. Refit the inner cover.

Figure 1-5-96

Figure 1-5-97

Drum heater electrode

Figure 1-5-98

Show Quick Links

Table of Contents

Taskalfa 820