Kyocera TASKalfa 620 Service Manual page 102

2KN/2KP
Maintenance
item No.
Setting the paper ejection device
U248
Description
Adjusts the paper stop timing in the punch mode, the booklet stapling position, and the center folding position
for the copier with an document finisher installed. Also, displays and clears the punch-hole scrap count.
Purpose
Adjustment or registration stop timing in punch mode
Adjust if skewed paper conveying occurs or if the copy paper is Z-folded in punch mode.
Adjustment of paper stop timing in the punch mode
To adjust this item when the position of a punch hole is different from the specified one.
Punch-hole scrap count display (clearing)
Used to manually clear the punch-hole scrap count if a message requiring collection of punch-hole scrap is
shown on the touch panel after collection.
Adjustment of booklet stapling position
Adjusts the booklet stapling position in the stitching mode if the position is not proper.
Adjustment of center folding position
Adjusts the center folding position in the stitching mode if the position is not proper.
Setting the punch limit
Sets the maximum number of punches possible in order to be informed of the timing for disposing of waste
punch. Decrease the value when using thick paper frequently.
Start
Press the start key. The screen for selecting an item is displayed.
Display
PUNCH REGIST ADJUST
PUNCH POSITION ADJUST
PUNCH COUNT
SADDLE STAPLE ADJUST
SADDLE ADJUST
PUNCH PRESET
Setting the registration stop timing in punch mode
1. Select PUNCH REGIST ADJUST at the screen for selecting an item.
2. Change the value using the cursor up/down keys.
Description
Adjustment of registration stop timing in punch mode
Sample 1
If skewed paper conveying occurs (sample 1), increase the preset value. If the copy paper is Z-folded
(sample 2), decrease the preset value.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
1-3-64
Description
Description
Adjustment of registration stop timing in punch mode
Adjustment of the paper stop timing in punch mode
Punch-hole scrap count display
Booklet stapling position adjustment
Adjustment of center folding position
Punch limit
Sample 2
Setting range Initial setting
-5 to 5 0